- Login Wildeye
- Click on the sites tab at the top of the screen.
- Locate the site that you want to add a pressure transducer to and click on it's wrench icon
on the right hand side of the window. - Locate the button "Add Sensor" Button
- Start typing in the manufacture of the pressure transducer
- Click the "Use" button
- When selecting the drop downs
- Native vs ACC-EXP
- Native: This is the regular cable with no box
- ACC-EXP: This is a very unique cable with a small box that is inline with the cable that connects to the pressure transducer
- <n> Pressure Sensor: This helps distinguish between cable 1 and cable 2
- Native 4-20mA input: The drop down will vary by name depending on the logger used. The choices will match what is listed under the "Native Inputs". i.e. if "Sensor Position 1" has a name of MAC 4-20mA, that name will apper as it does on the Native Inputs.
- Note: When planning which cable you'll be attaching the pressure transducer, that is the side that will need to be configured.
- Note: When planning which cable you'll be attaching the pressure transducer, that is the side that will need to be configured.
- Native vs ACC-EXP
- Click "Add Sensor to Site"