|
Wildeye is a standard industrial telemetry device for collecting remote meter & sensor data for any device within cellular coverage. Connect a Wildeye to an Aquamonix I500 flow meter to transfer flow and meter data directly to the web. There are several options to connect up the Aquamonix I500:
For full details of meter interface and wiring see details of each option below. |
|
||||||||
Aquamonix I500 Flow Meter |
Wildeye RS485 Connection (Recommended)
Use a standard Wildeye WILD-M-R-NAR4-NACS to connect to an Aquamonix I500 using the RS-485 interface.
The Wideye can be powered from the Aquamonix I500 modem power port, or it can alternatively source it's own external power.
For detailed wiring refer to wiring diagrams below.
Wildeye |
+ |
Optional Extension |
+ |
Wildeye Adapter |
+ |
Meter Addon |
+ |
Flow Meter |
 |
 |
 |
 |
 |
||||
WILD-M-R-NAR4-NACS |
ACC-CAB-M12-EXT-5P-2M |
ACC-CAB-M12-M5 |
Aquamonix PN: 625056 |
Aquamonix PN: I500 or I500-M |
||||
Notes:WILD-M-R-NAR4-NACS is standard RS485 Wildeye variant. |
Notes:Choose optional extension cables from 2m to 30m length |
Notes:Wire the Wildeye flying leads to the Aquamonix RS485 ports following below wiring guide |
Notes:I500 modem option card with low power RS232/RS485/RS422 port with Modbus.Only required if the card not already installed inside the I500 |
Notes:Requires Aquamonix modem option card (with low power RS232/RS485/RS422 port with Modbus). Order as I500-M or separately the option card 625056 |
Wildeye RS485 Wiring Details (Wildeye Powered Externally)
Attach the ACC-CAB-M12-M-5 adapter to the NAR4 cable of the WILD-M-R-NAR4-NAC model.
The adapter bare wires connect to the Aquamonix I500-M as follows:
Wildeye RS485 Wiring Details (Wildeye Powered from I500)
- Attach the ACC-CAB-M12-M-5 adapter to the NAR4 cable of the WILD-M-R-NAR4-NAC.
- Attach the ACC-CAB-M8-F-3 power cable to the M8 power cable of the WILD-M-R-NAR4-NAC.
Wire the bare-wires of the 2 cables to the Aquamonix I500-M as follows:
Wildeye Custom RS232 Connection (Legacy Support)
Wildeye legacy product WILD-M-R-I500 has a custom cable to connect to an Aquamonix I500 using the RS-232 interface. The custom cable is designed to power the Wildeye from the Aquamonix I500 modem power port.
Wildeye |
+ |
Optional Extension |
+ |
Wildeye Adapter |
+ |
Meter Addon |
+ |
Flow Meter |
 |
|
|
||||||
WILD-M-R-I500 |
Not available |
Not required |
Aquamonix PN: 625056 |
Aquamonix PN: I500 or I500-M |
||||
Notes:WILD-M-R-I500 is a non-standard variant. Wire the I500 flying leads to the Aquamonix RS232 and power ports following below wiring guide. |
Notes:Standard pluggable extension cables not compatible with special I500 Wildeye variant - perform custom extension if required. |
Notes:The special I500 Wildeye cable terminates in flying leads - no adapter cable is required. See wiring detail below. |
Notes:I500 modem option card with low power RS232/RS485/RS422 port with Modbus.Only required if the card not already installed inside the I500 |
Notes:Requires Aquamonix modem option card (with low power RS232/RS485/RS422 port with Modbus). Order as I500-M or separately the option card 625056 |
Wildeye RS-232 Wiring Details (Wildeye Powered from I500)
Attach the the bare wires that exit the the WILD-M-R-I500 directly to the Aquamonix I500-M as follows:
Default MODBUS Input Settings
The Wildeye is configured by default to log the following parameters for the Aquamonix I500. In addition, the Wildeye automatically extracts a range of parameters from the raw MODBUS register values for ease of use.
Default MODBUS Inputs
| Battery Level | logs every 15 minute(s) |
| Cumulative Total (O/PEAK) | logs every 15 minute(s) |
| Cumulative Total (PEAK) | logs every 15 minute(s) |
| Current Flow_Parent | logs every 15 minute(s) |
| F Factor | logs every 15 minute(s) |
| Z Factor | logs every 15 minute(s) |
| Firmware | logs every 15 minute(s) |
| Flow Rate ML/d | logs every 15 minute(s) |
| Logic status of Alarms | logs every 15 minute(s) |
| Logic status of Self Test function | logs every 15 minute(s) |
| Logic Status of System Faults | logs every 15 minute(s) |
| Meter ID | logs every 15 minute(s) |
| On Time | logs every 15 minute(s) |
| Off Time | logs every 15 minute(s) |
| Peak Total | logs every 15 minute(s) |
| Pipe Size | logs every 15 minute(s) |
| Number of Days Since Reset | logs every 15 minute(s) |
| Number of Hours Since Reset | logs every 15 minute(s) |
| Number of Resets | logs every 15 minute(s) |
| Low-flow Cut-off (mm/s) | logs every 15 minute(s) |
| Zero-flow Off-time (s) | logs every 15 minute(s) |
Default Calculated Values
| A/D Converter check | Automatically calculated every logging interval |
| Coil Current check | Automatically calculated every logging interval |
| Coil Inductance High | Automatically calculated every logging interval |
| Coil Inductance Low | Automatically calculated every logging interval |
| Coil Resistance High | Automatically calculated every logging interval |
| Coil Resistance Low | Automatically calculated every logging interval |
| Configuration Data check | Automatically calculated every logging interval |
| Current Flow ML/d | Automatically calculated every logging interval |
| Electrode Check Fault | Automatically calculated every logging interval |
| Forward Flow | Automatically calculated every logging interval |
| High (internal) temperature | Automatically calculated every logging interval |
| High Flow | Automatically calculated every logging interval |
| Low Battery | Automatically calculated every logging interval |
| Low Battery alarm | Automatically calculated every logging interval |
| Low Flow | Automatically calculated every logging interval |
| Pipe Not Full alarm | Automatically calculated every logging interval |
| Power Supply check | Automatically calculated every logging interval |
| Real Time Clock check | Automatically calculated every logging interval |
| Reverse Flow | Automatically calculated every logging interval |
| SD Card check | Automatically calculated every logging interval |
| Season | Automatically calculated every logging interval |
| Serial Number check | Automatically calculated every logging interval |
| Settling Time Fault | Automatically calculated every logging interval |
| Signal Noise Fault | Automatically calculated every logging interval |
| Signal Range Fault | Automatically calculated every logging interval |
| Solar current fault | Automatically calculated every logging interval |
| System Fault | Automatically calculated every logging interval |
| Total (ML) | Automatically calculated every logging interval |
| Total Off Peak (ML) | Automatically calculated every logging interval |
| Total Peak (ML) | Automatically calculated every logging interval |