|
Wildeye is a standard industrial telemetry device for collecting remote meter & sensor data for any device within cellular coverage. Connect a Wildeye to an Endress+Hauser Proline Promag W 400 flow meter to transfer flow and meter data directly to the web. The following interface options for connecting to the Proline Promag W 400 are documented here:
For full details of meter interface and wiring see details of each option below. |
|
||||
Endress+Hauser Proline Promag |
Wildeye Pulse Count Connection (Recommended)
Use a standard Wildeye WILD-M-R-NACS-NACS (Wildeye with solar option) or WILD-M-B-NACS (Wildeye with battery option) to connect to an Endress+Hauser Proline Promag W 400 using the pulse count interface.
For detailed wiring refer to wiring diagrams below.
Wildeye |
+ |
Optional Extension |
+ |
Wildeye Adapter |
+ |
Meter Addon |
+ |
Flow Meter |
 |
 |
 |
 |
|||||
WILD-M-R-NACS-NACS |
ACC-CAB-M12-EXT-5P-2M |
ACC-CAB-M12-M-5 |
Not Required |
Endress+Hauser Proline Promag W 400 |
||||
Notes:Use WILD-M-B-NACS for long-life battery or WILD-M-R-NACS-NACS for solar. |
Notes:Choose optional extension cables from 2m to 30m length |
Notes:Wire the Wildeye flying leads to the Endress+Hauser ports following below wiring guide |
Notes:Proline Promag W 400 with order code options "H" and "I" provides pulse outputs. |
Notes:Proline Promag W 400 with order code options "H" and "I" provides pulse outputs. |
Wildeye Pulse Counter Wiring Details
Attach the ACC-CAB-M12-M-5 adapter to the NACS cable of the WILD-M-B-NACS or WILD-M-R-NACS-NACS model.
The adapter bare wires connect to the Endress+Hauser Proline Promag W 400 as follows:
