|
Wildeye is a standard industrial telemetry device for collecting remote meter & sensor data for any device within cellular coverage. Connect a Wildeye to a Technoflo PS32 flow meter to transfer flow and meter data directly to the web. There are several options to connect up the Technoflo PS32:
For full details of meter interface and wiring see details of each option below. |
|
||||
Technoflo PS32 Flow Meter with Wildeye Telemetry |
Wildeye Pulse Count Connection
Use a standard Wildeye WILD-M-R-NACS-NACS (Wildeye with solar option) or WILD-M-B-NACS (Wildeye with battery option) to connect a Technoflo PS32 using the pulse count interface.
For detailed wiring refer to wiring diagrams below.
Wildeye |
+ |
Optional Extension |
+ |
Wildeye Adapter |
+ |
Meter Addon |
+ |
Flow Meter |
 |
 |
 |
 |
|||||
WILD-M-R-NACS-NACS |
ACC-CAB-M12-EXT-5P-2M |
ACC-CAB-M12-M5 |
Not Required |
Technoflo PS32 |
||||
Notes:Use WILD-M-B-NACS for long-life battery or WILD-M-R-NACS-NACS for solar. |
Notes:Choose optional extension cables from 2m to 30m length |
Notes:Wire the Wildeye flying leads to the PS32 pulse count port following below wiring guide |
Notes:The PS32 comes with built in pulse output options |
Notes: |
Wildeye Pulse Counter Wiring Details
Attach the ACC-CAB-M12-M-5 adapter to the NACS cable of the WILD-M-B-NACS or WILD-M-R-NACS-NACS model.
The adapter bare wires connect to the Technoflo PS32 as follows:
Wiring Snaphot:
