Wildeye Sensor: Standard Submersible Depth Sensor – Wildeye Information

The Wildeye Standard Submersible Depth Sensor connects directly to your Wildeye to enable reporting of reservoir, lake and ditch levels directly to your desktop, tablet or smartphone (iPhone or Android app).

The sensor is a 1in (2.5cm) diameter stainless steel depth gauge designed to install near the bottom of a water body to measure the height of water above it.

The sensor is pre-packaged with a vent box for moisture protection and comes in a range of cable and depth ranges to suit your application.

The sensor comes with a polarized M12 connector to plug directly into your Wildeye.

Connectivity is managed by the award-winning Wildeye 4G IoT telemetry device. Data is accessible through the Wildeye portal from where it can be viewed and exported.

Applications:

Reservoir and Pond Monitoring
Ground water monitoring
Environmental remediation
Surface water monitoring
Down hole
Water Tanks
Well monitoring

Features

• Meets application requirements with slim design with bullet nose design which protects the diaphragm from damage

• Increased life with lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty)

• Eliminates particulate or water droplets from entering the transducer using maintenance-free filter

• Flexible installation options with NPT connection to rigidly install in a pipe/conduit or use a hanging loop to attach a chain to remove from the installation

Installation

The sensor should be installed in a manner that secures it in position so it cannot move over time.

Refer to sensor drawings below for sensor size and thread size details.

Related sensor options:

Refer to the Wildeye "WELL" submersible family option for a miniature size sensor of 0.5in diameter designed for well and ground water
Refer to the Wildeye "SLUDGE" submsersible family for a sensor option designed for applications with harsh liquids and/or requiring instrinsically safe sensors.

Submersible Depth Sensor Ordering Options

Part Code	Depth Range	Accuracy (out of box)	Cable Length
ACC-SEN-LVL-STNDRD-V-D8F-C16F	2.5m (8.2021ft)	0.63±cm (±0.25 in)	2.5m (8.2ft)
ACC-SEN-LVL-STNDRD-V-D32F-C30F	10m (32.8084 ft)	±2.5cm (±1 in)	10m (32.8 ft)
ACC-SEN-LVL-STNDRD-V-D32F-C59F	10m (32.8084 ft)	±2.5cm (±1 in)	18m (59ft)
ACC-SEN-LVL-STNDRD-V-D34F-C120F	15psi (34.60874 ft)	±1.04 in	120ft
ACC-SEN-LVL-STNDRD-V-D70F-C80F	31psi (71.52473 ft)	±2.15 in	80ft

Submersible Depth Gauge Product Specifications

Parameter	Specification
Service	Compatible Liquids
Wetted Materials	Body: 316 SS, 316L SS; Bullet nose: PVC; Cable: Polyether polyurethane; Seals: Fluoroelastomer.
Accuracy	±0.25% FS.
Temperature Limit:	Polyurethane: 0 to 150°F (-18 to 66°C)
Thermal Effect:	±0.02% full scale/°F.
Pressure Limit:	2X FS
Mounting Orientation:	Suspended in tank below level being measured.
Electrical Protection:	Lightning and surge protection;
Weight:	2.2 lb (1.0 kg).
Compliance:	CE

Articles in this section

Features

Installation

Submersible Depth Sensor Ordering Options

ACC-SEN-LVL-STNDRD-V-D8F-C16F

2.5m (8.2021ft)

0.63±cm (±0.25 in)

2.5m (8.2ft)

ACC-SEN-LVL-STNDRD-V-D32F-C30F

10m (32.8084 ft)

±2.5cm (±1 in)

10m (32.8 ft)

ACC-SEN-LVL-STNDRD-V-D32F-C59F

10m (32.8084 ft)

±2.5cm (±1 in)

18m (59ft)

ACC-SEN-LVL-STNDRD-V-D34F-C120F

15psi (34.60874 ft)

±1.04 in

120ft

ACC-SEN-LVL-STNDRD-V-D70F-C80F

31psi (71.52473 ft)

±2.15 in

80ft

Submersible Depth Gauge Product Specifications

Service

Compatible Liquids

Wetted Materials

Body: 316 SS, 316L SS; Bullet nose: PVC; Cable: Polyether polyurethane; Seals: Fluoroelastomer.

Accuracy

±0.25% FS.

Temperature Limit:

Polyurethane: 0 to 150°F (-18 to 66°C)

Thermal Effect:

±0.02% full scale/°F.

Pressure Limit:

2X FS

Mounting Orientation:

Suspended in tank below level being measured.

Electrical Protection:

Lightning and surge protection;

Weight:

2.2 lb (1.0 kg).

Compliance:

CE