Skip to main content
Skip table of contents

Netafim Octave - Wiring

Tools required:

  • Wire strippers

  • A way to secure two bare wire connections

Installation Materials:

1 x Wildeye Cable (part# WILD-CAB-M12-M-5)

Instructions:

Note: Programming software is not available to the end user. Once the meter is programmed by the Netafim prior to shipment, it can only be reset by Netafim. If possible find out the part ordered from Netafim this will drastically lower the installation time necessary to program the Octave correctly.

  1. Connect the wires, black to black and red to white.

  2. Secure the wires together

image-20240521-014421.png
image-20240521-014450.png

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.